Revolectrix Cellpro PowerLab 8 (v2) Multi-Chemistry 1344W Battery Workstation

Revolectrix Cellpro PowerLab 8 (v2) Multi-Chemistry 1344W Battery Workstation

$239.95

2 in stock

Description

Revolectrix Cellpro PowerLab 8 (v2) Multi-Chemistry 1344W Battery Workstation

FMA Direct and Revolectrix have teamed up once again on this ambitious endeavor. The industry’s first 1344W workhorse! So much more than a charger, we had to call it something else, so we chose to label it a “Battery Workstation”. Capable of charging, discharging, monitoring, or performing multiple cycles on any current or future battery chemistry at alarming speed, PL8 represents the end of all speculation about who sells the most powerful battery management system in its class for the best value.

 

Features of Revolectrix Cellpro PowerLab 8 (v2) Multi-Chemistry 1344W Battery Workstation

  • For Battery types: Lithium Polymer (1s to 8s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 8s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 8s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 8s balanced, 1s to 10s unbalanced), NiCd (1s to 21s), NiMH (1s to 21s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA)
  • Pack capacity: 20 mAh to 360Ah
  • Input voltage: 10-32VDC, reverse polarity protected
  • Input current: 1A to 60A, software limited
  • Power conversion: Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current
  • Output battery charge current: Adjustable range 10mA to 40A, limited by 60A input current*
  • Output battery discharge current: Internal discharge 10mA to 10A, 100W max Regenerative discharge 10mA to 40A, 1344W max**
  • Continuous max output power: 612W @ +12VDC input, 1344W @ +26.35VDC
  • Cell balancing: Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging
  • Voltage calibration: Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV
  • Current calibration: Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA
  • Measurement accuracy:

-Voltage resolution: 78uV (16 bit)
-Voltage tolerance: +/- 6mV
-Charge current: +/- 1%
-Capacity added to pack: +/- 1%
-Percent capacity (“Fuel”): +/- 5% (with accurate fuel table defined for battery being charged)

  • Serial data output: 19.2kbps, 8 bits, 1 start bit, 1 stop bit, no parity
  • Data integrity: Checksum, CRC checking
  • Cooling fans: Twin, 13 CFM, 50mm diameter
  • Heat sink: Internal 200W aluminum, thin finned
  • Output battery connector: “Cellpro” compatible, JST PA series, 9 position
  • LCD: 2 line, 16 character, light grey/blue backlit
  • Size: 5.82″ x 6.55″ x 3.57″

 

Footnotes:

* Please note, for safety reasons, available charger current may be limited for certain battery types and/or charging modes, e.g., non-balanced charge of Li

** Please check bullet number 9 in the section titled “Major Features” (Features tab) for a detailed description of Regenerative Discharge

Additional information

Weight 1.33 kg

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.